Compression Ratio Calculator
The Compression Ratio Calculator determines an engine's compression ratio from swept volume (displacement) and clearance volume (combustion chamber). Optimize your engine build for power, efficiency, and fuel octane requirements.
🕐 Recent Calculations
What is Compression Ratio?
Compression ratio is the ratio of the total cylinder volume (when the piston is at bottom dead center) to the clearance volume (when the piston is at top dead center). A 10:1 compression ratio means the air-fuel mixture is compressed to 1/10th of its original volume before ignition.
Higher compression ratios increase thermal efficiency and power output but require higher octane fuel to prevent detonation (knock). Stock gasoline engines typically run 9:1 to 12:1. Diesel engines use 14:1 to 25:1 because diesel fuel ignites through compression alone.
Formule ed Equazioni Utilizzate
Questo Compression Ratio Calculator utilizza 5 equazioni fondamentali:
1 Compression Ratio ▼
A cylinder with 500cc swept volume and 55cc clearance: CR = (500 + 55) / 55 = 10.09:1.
2 Swept Volume (Single Cylinder) ▼
Bore = 86mm, Stroke = 86mm: V = 0.7854 × 86² × 86 = 499.6 cc.
3 Clearance Volume from CR ▼
To achieve 9.5:1 with 500cc displacement: CV = 500 / (9.5 - 1) = 58.82 cc.
Come Usare Questo Calcolatore
Per utilizzare questo Calcolatore di Rapporto, segui 3 semplici passaggi:
Inserisci i Valori
Digita i valori noti nei campi di input. Lascia un campo vuoto: è il valore incognito che il Calcolatore di Rapporto risolverà.
Scegli la Modalità
Seleziona la modalità: Risolvi, Semplifica o Scala. Ogni modalità applica equazioni diverse ai tuoi valori di input.
Ottieni i Risultati
Fai clic su Calcola. La schermata dei risultati mostra la risposta con una barra grafica del rapporto, un grafico a torta e una spiegazione dettagliata passo dopo passo.
Problemi di Esempio e Soluzioni Passo dopo Passo
Ecco 3 problemi di esempio con soluzioni dettagliate passo dopo passo che utilizzano questo calcolatore:
Input 1 Engine with 600cc displacement and 60cc chamber
Input 2 Calculate displacement for 88mm bore, 82mm stroke
Input 3 Find clearance volume for 12:1 CR, 450cc displacement
Domande Frequenti
What compression ratio is best for pump gas (87 octane)? ▼
For 87 octane regular gas, stay at or below 9.5:1 static compression ratio. Modern engines with direct injection and variable valve timing can safely run 10:1 to 11:1 on regular fuel.
How does compression ratio affect horsepower? ▼
Each 1-point increase in compression ratio typically yields 3-4% more power, up to a limit. Going from 9:1 to 10:1 might add 10-15 HP on a 300 HP engine. Beyond about 13:1, gains diminish and knock risk increases.
What is the compression ratio of a diesel engine? ▼
Diesel engines run 14:1 to 25:1 compression ratios. The high compression heats air enough to ignite diesel fuel without spark plugs. Modern common-rail diesels typically use 16:1 to 18:1.
How do I measure clearance volume? ▼
Fill the combustion chamber with fluid (isopropyl alcohol or light oil) through a burette with the valves closed and piston at TDC. The volume of fluid needed equals the clearance volume. Typical values range from 40-70cc.
Does milling the head increase compression ratio? ▼
Yes. Milling (shaving) the cylinder head reduces clearance volume, increasing compression ratio. Removing 0.020 inches from the head surface typically raises CR by 0.3-0.5 points depending on chamber size.