Compression Ratio Calculator
The Compression Ratio Calculator determines an engine's compression ratio from swept volume (displacement) and clearance volume (combustion chamber). Optimize your engine build for power, efficiency, and fuel octane requirements.
🕐 Recent Calculations
What is Compression Ratio?
Compression ratio is the ratio of the total cylinder volume (when the piston is at bottom dead center) to the clearance volume (when the piston is at top dead center). A 10:1 compression ratio means the air-fuel mixture is compressed to 1/10th of its original volume before ignition.
Higher compression ratios increase thermal efficiency and power output but require higher octane fuel to prevent detonation (knock). Stock gasoline engines typically run 9:1 to 12:1. Diesel engines use 14:1 to 25:1 because diesel fuel ignites through compression alone.
使用される計算公式・方程式
この計算ツールは5つの主要な公式を使用しています：
1 Compression Ratio ▼
A cylinder with 500cc swept volume and 55cc clearance: CR = (500 + 55) / 55 = 10.09:1.
2 Swept Volume (Single Cylinder) ▼
Bore = 86mm, Stroke = 86mm: V = 0.7854 × 86² × 86 = 499.6 cc.
3 Clearance Volume from CR ▼
To achieve 9.5:1 with 500cc displacement: CV = 500 / (9.5 - 1) = 58.82 cc.
比率計算ツールの使い方
この比率計算ツールは、以下の3ステップで簡単にご利用いただけます：
数値を入力
入力欄に既知の比率の値を入力します。求めたい未知数の入力欄は空欄のままにしておきます。
モードを選択
比率モード（解く、簡素化、スケーリング）を選択します。各モードで異なる計算式が適用されます。
結果を確認
計算するボタンを押します。結果画面に答えと、視覚的な比率バー、円グラフ、詳細なステップバイステップの解決プロセスが表示されます。
実例問題と段階的な解説
本比率計算ツールを使って、以下の3つの例題をステップバイステップで解決するプロセスです：
入力 1 Engine with 600cc displacement and 60cc chamber
入力 2 Calculate displacement for 88mm bore, 82mm stroke
入力 3 Find clearance volume for 12:1 CR, 450cc displacement
よくある質問 (FAQ)
What compression ratio is best for pump gas (87 octane)? ▼
For 87 octane regular gas, stay at or below 9.5:1 static compression ratio. Modern engines with direct injection and variable valve timing can safely run 10:1 to 11:1 on regular fuel.
How does compression ratio affect horsepower? ▼
Each 1-point increase in compression ratio typically yields 3-4% more power, up to a limit. Going from 9:1 to 10:1 might add 10-15 HP on a 300 HP engine. Beyond about 13:1, gains diminish and knock risk increases.
What is the compression ratio of a diesel engine? ▼
Diesel engines run 14:1 to 25:1 compression ratios. The high compression heats air enough to ignite diesel fuel without spark plugs. Modern common-rail diesels typically use 16:1 to 18:1.
How do I measure clearance volume? ▼
Fill the combustion chamber with fluid (isopropyl alcohol or light oil) through a burette with the valves closed and piston at TDC. The volume of fluid needed equals the clearance volume. Typical values range from 40-70cc.
Does milling the head increase compression ratio? ▼
Yes. Milling (shaving) the cylinder head reduces clearance volume, increasing compression ratio. Removing 0.020 inches from the head surface typically raises CR by 0.3-0.5 points depending on chamber size.