Scale Factor Calculator
The Scale Factor Calculator determines the multiplier between two measurements. Enter original and scaled dimensions to find the scale factor, or apply a known factor to compute new sizes. Ideal for architectural blueprints, model building, map reading, and resizing artwork.
🕐 Recent Calculations
What is a Scale Factor?
A scale factor is the ratio between a scaled measurement and the corresponding original measurement. If a 12-meter wall is represented as 6 cm on a blueprint, the scale factor is 6/1200 = 1/200, or 1 : 200. The scale factor tells you how many times larger or smaller the representation is compared to reality.
Scale factors are used in architecture (floor plans), cartography (maps), model engineering (miniature replicas), photography (enlargements and reductions), and geometry (similar triangles). A scale factor greater than 1 means enlargement; less than 1 means reduction.
적용 수학 공식 및 방정식
이 Scale Factor Calculator는 5가지 핵심 수학 공식을 사용합니다:
1 Scale Factor Calculation ▼
Divide the new measurement by the original measurement. A 3 cm model of a 6 m object has a scale factor of 3/600 = 1/200.
2 Scaled Size from Factor ▼
Multiply the original measurement by the scale factor. A 10 m wall at 1:50 scale = 10 × (1/50) = 0.2 m = 20 cm.
3 Original Size from Scaled ▼
Divide the scaled measurement by the scale factor. A 4 cm line on a 1:100 map = 4 / (1/100) = 400 cm = 4 m.
비율 계산기 사용법
이 비율 계산기는 아래의 3단계로 쉽게 사용할 수 있습니다:
수치 입력하기
입력 칸에 알고 있는 비율 값을 입력합니다. 구하려는 미지수 자리의 칸 하나는 비워둡니다.
모드 선택하기
비율 모드(풀기, 간소화, 스케일링)를 선택합니다. 각 모드는 입력한 수치에 맞춰 다른 공식들을 적용합니다.
결과 확인하기
계산하기 버튼을 누릅니다. 결과 화면에 정답과 함께 시각적인 비율 바, 원형 차트, 상세한 단계별 풀이 과정이 출력됩니다.
실제 예제 문제 및 단계별 풀이
비율 계산기를 활용하여 아래 3가지 예제 문제를 단계별로 해결하는 과정입니다:
입력 1 Find scale factor: 5 cm model of a 10 m building
입력 2 Scale a 15 m room to 1:50 blueprint
입력 3 Find real distance from a map measurement of 8 cm at 1:25000
자주 묻는 질문 (FAQ)
How do you find the scale factor between two objects? ▼
Divide any measurement of the scaled object by the corresponding measurement of the original. If the model is 4 cm and the real object is 8 m (800 cm), the scale factor is 4/800 = 1/200 or 1 : 200.
What does a scale factor of 2 mean? ▼
A scale factor of 2 means the new object is twice the size of the original. Every dimension is multiplied by 2 — a 5 cm line becomes 10 cm, a 3 cm width becomes 6 cm.
What is the difference between scale factor and ratio? ▼
A scale factor is a specific type of ratio that compares a scaled representation to the original. While all scale factors are ratios, not all ratios are scale factors — ratios can compare any two quantities.
How do architects use scale factors? ▼
Architects use scale factors like 1:100 or 1:50 to draw buildings at reduced sizes on paper. At 1:100, every 1 cm on the plan represents 100 cm (1 meter) in reality. This allows entire buildings to fit on standard drawing sheets.
Can scale factors be greater than 1? ▼
Yes. Scale factors greater than 1 represent enlargement. A microscope image at 400× has a scale factor of 400:1, meaning the image is 400 times larger than the actual specimen.