Compression Ratio Calculator
The Compression Ratio Calculator determines an engine's compression ratio from swept volume (displacement) and clearance volume (combustion chamber). Optimize your engine build for power, efficiency, and fuel octane requirements.
🕐 Recent Calculations
What is Compression Ratio?
Compression ratio is the ratio of the total cylinder volume (when the piston is at bottom dead center) to the clearance volume (when the piston is at top dead center). A 10:1 compression ratio means the air-fuel mixture is compressed to 1/10th of its original volume before ignition.
Higher compression ratios increase thermal efficiency and power output but require higher octane fuel to prevent detonation (knock). Stock gasoline engines typically run 9:1 to 12:1. Diesel engines use 14:1 to 25:1 because diesel fuel ignites through compression alone.
Kullanılan Formüller & Denklemler
Bu Compression Ratio Calculator aracı 5 temel denklem kullanır:
1 Compression Ratio ▼
A cylinder with 500cc swept volume and 55cc clearance: CR = (500 + 55) / 55 = 10.09:1.
2 Swept Volume (Single Cylinder) ▼
Bore = 86mm, Stroke = 86mm: V = 0.7854 × 86² × 86 = 499.6 cc.
3 Clearance Volume from CR ▼
To achieve 9.5:1 with 500cc displacement: CV = 500 / (9.5 - 1) = 58.82 cc.
Bu Hesaplayıcı Nasıl Kullanılır?
Bu Oran Hesaplayıcıyı kullanmak için 3 adımı takip edin:
Değerleri Girin
Bilinen oran değerlerini giriş alanlarına yazın. Bir alanı boş bırakın — Oran Hesaplayıcının çözdüğü bilinmeyen değer budur.
Mod Seçin
Oran modunu seçin — Çöz, Basitleştir veya Ölçeklendir. Her mod, giriş değerlerinize farklı denklemler uygular.
Sonuçları Alın
Hesapla'ya tıklayın. Sonuç ekranı, cevabı görsel bir oran çubuğu, pasta grafiği ve adım adım çözüm dökümü ile görüntüler.
Örnek Problemler & Adım Adım Çözümler
İşte bu Oran Hesaplayıcıyı kullanan adım adım çözümlü 3 örnek problem:
Giriş 1 Engine with 600cc displacement and 60cc chamber
Giriş 2 Calculate displacement for 88mm bore, 82mm stroke
Giriş 3 Find clearance volume for 12:1 CR, 450cc displacement
Sıkça Sorulan Sorular
What compression ratio is best for pump gas (87 octane)? ▼
For 87 octane regular gas, stay at or below 9.5:1 static compression ratio. Modern engines with direct injection and variable valve timing can safely run 10:1 to 11:1 on regular fuel.
How does compression ratio affect horsepower? ▼
Each 1-point increase in compression ratio typically yields 3-4% more power, up to a limit. Going from 9:1 to 10:1 might add 10-15 HP on a 300 HP engine. Beyond about 13:1, gains diminish and knock risk increases.
What is the compression ratio of a diesel engine? ▼
Diesel engines run 14:1 to 25:1 compression ratios. The high compression heats air enough to ignite diesel fuel without spark plugs. Modern common-rail diesels typically use 16:1 to 18:1.
How do I measure clearance volume? ▼
Fill the combustion chamber with fluid (isopropyl alcohol or light oil) through a burette with the valves closed and piston at TDC. The volume of fluid needed equals the clearance volume. Typical values range from 40-70cc.
Does milling the head increase compression ratio? ▼
Yes. Milling (shaving) the cylinder head reduces clearance volume, increasing compression ratio. Removing 0.020 inches from the head surface typically raises CR by 0.3-0.5 points depending on chamber size.