Final Drive Ratio Calculator
The Final Drive Ratio Calculator computes the overall drivetrain ratio by multiplying transmission gear ratio, transfer case ratio, and axle ratio. Determine engine RPM at any speed, effective torque at the wheels, and optimize your vehicle's gearing setup.
🕐 Recent Calculations
What is Final Drive Ratio?
The final drive ratio is the overall gear multiplication from the engine crankshaft to the drive wheels. It combines the transmission gear ratio, transfer case ratio (if equipped), and the axle (differential) ratio. The final drive ratio determines the relationship between engine RPM and wheel speed.
For example, in first gear: transmission ratio 3.5:1 × axle ratio 3.73:1 = final drive ratio 13.06:1. This means the engine turns 13.06 times for every wheel revolution, multiplying torque by 13.06× while dividing speed accordingly.
Wzory i Zastosowane Równania
Kalkulator opiera się na 5 podstawowych równaniach:
1 Final Drive Ratio ▼
3.5 × 1.0 × 3.73 = 13.06:1 in first gear (2WD without transfer case).
2 RPM at Road Speed ▼
At 60 mph, FDR 2.61 (overdrive), 30" tires: RPM = (60 × 2.61 × 336) / 30 = 1755 RPM.
3 Road Speed at RPM ▼
At 3000 RPM, FDR 3.73, 28" tires: Speed = (3000 × 28) / (3.73 × 336) = 67 mph.
Jak Korzystać z Kalkulatora
Aby skorzystać z tego kalkulatora stosunku, wykonaj 3 proste kroki:
Wprowadź Dane
Wpisz znane wartości w pola wejściowe. Jedno pole pozostaw puste — jest to niewiadoma, którą obliczy kalkulator.
Wybierz Tryb
Wybierz tryb pracy — Rozwiązywanie proporcji, Upraszczanie lub Skalowanie. Każdy tryb stosuje inne równania.
Odbierz Wynik
Kliknij Oblicz. Ekran wyników wyświetla odpowiedź wraz z kolorowym paskiem stosunku, wykresem kołowym oraz objaśnieniem kroku po kroku.
Przykłady Zadań z Rozwiązaniami Krok po Kroku
Oto 3 przykładowe zadania z pełnym opisem kroków matematycznych w tym kalkulatorze:
Wejście 1 Truck in 3rd gear: trans 1.5:1, axle 4.10:1
Wejście 2 Highway cruise: overdrive 0.70:1, axle 3.55:1
Wejście 3 4×4 in low range: trans 1:1, T-case 2.72:1, axle 3.73:1
Najczęściej Zadawane Pytania
How does final drive ratio affect acceleration vs top speed? ▼
Higher final drive ratios increase acceleration (more torque at wheels) but reduce top speed. Lower ratios allow higher top speed but slower acceleration. The ideal ratio balances both for the vehicle's purpose.
What is a transfer case ratio? ▼
The transfer case in 4WD vehicles has a high range (usually 1:1) and low range (typically 2.5:1 to 4.0:1). Low range multiplies the final drive ratio for extreme off-road torque at very low speeds.
How do I calculate engine RPM at highway speed? ▼
RPM = (Speed × Axle Ratio × Trans Ratio × 336) / Tire Diameter. For 70 mph, 3.73 axle, 0.68 overdrive, 30" tires: RPM = (70 × 3.73 × 0.68 × 336) / 30 = 1990 RPM.
Does changing tire size affect the effective final drive ratio? ▼
Yes. Larger tires effectively lower the final drive ratio (like changing to a numerically lower axle gear). Going from 28" to 33" tires reduces effective ratio by about 18%, hurting acceleration and raising RPM.
What final drive ratio is best for towing? ▼
For heavy towing, a final drive of 10-15:1 in the tow gear provides sufficient torque. This typically means a 3.73-4.10 axle with a low first gear (3.5-4.0:1). Overdrive should be disabled when towing heavy loads uphill.