Darmowy i Natychmiastowy — Bez Rejestracji

Tire Ratio Calculator

The Tire Ratio Calculator decodes tire size designations and calculates the aspect ratio, sidewall height, overall diameter, and circumference. Compare tire sizes to check speedometer accuracy and ensure proper fitment for your vehicle.

Tire Ratio Calculator — Podgląd Stosunku na Żywo
Tire Dimensions
A
B
⚖️
Proportion Solver
A : B = C : D — Enter any 3 values
:
=
:
📊
Results
Visual ratio breakdown
Solved Proportion
Simplified
Percentages
Decimal
Fraction
Visual Ratio
A
B
Part A: —
Part B: —
    Ratio Simplifier
    Reduce any ratio to its simplest form
    :
    📊
    Simplified Result
    Reduced to lowest terms
    Simplified Ratio
    GCD Used
    Percentages
    Decimal Ratio
    Fraction
    Visual Ratio
    A
    B
    Part A: —
    Part B: —
      📐
      Ratio Scaler
      Multiply a ratio by a scale factor
      :
      ×
      📊
      Scaled Result
      Ratio after scaling
      Scaled Ratio
      Original
      Factor
      Percentages
      Simplified
      Visual Ratio
      A
      B

        🕐 Recent Calculations

        📭
        No calculations yet. Start computing above!

        What is Tire Aspect Ratio?

        Tire aspect ratio is the ratio of the tire's sidewall height to its section width, expressed as a percentage. In the tire size 225/45R17, '45' is the aspect ratio — the sidewall height is 45% of the 225mm width, equaling 101.25mm. Lower aspect ratios indicate a shorter sidewall (sportier handling), while higher ratios mean a taller sidewall (more comfort).

        Tire aspect ratios typically range from 25 (ultra-low profile racing tires) to 80 (off-road and SUV tires). Standard passenger car tires use 50-65. The aspect ratio, combined with wheel diameter, determines the tire's overall diameter and rolling circumference, which affect speedometer calibration.

        Wzory i Zastosowane Równania

        Kalkulator opiera się na 5 podstawowych równaniach:

        1 Sidewall Height
        Sidewall = Section Width × (Aspect Ratio / 100)

        225mm width × 45/100 = 101.25mm sidewall height.

        2 Overall Tire Diameter
        Diameter = (2 × Sidewall) + (Rim Diameter × 25.4)

        225/45R17: Diameter = (2 × 101.25) + (17 × 25.4) = 202.5 + 431.8 = 634.3mm = 24.97 inches.

        3 Speedometer Error
        Error % = ((New Diameter / Old Diameter) - 1) × 100

        Going from 634mm to 660mm: Error = (660/634 - 1) × 100 = +4.1%. Speedometer reads slow by 4.1%.

        Jak Korzystać z Kalkulatora

        Aby skorzystać z tego kalkulatora stosunku, wykonaj 3 proste kroki:

        1

        Wprowadź Dane

        Wpisz znane wartości w pola wejściowe. Jedno pole pozostaw puste — jest to niewiadoma, którą obliczy kalkulator.

        2

        Wybierz Tryb

        Wybierz tryb pracy — Rozwiązywanie proporcji, Upraszczanie lub Skalowanie. Każdy tryb stosuje inne równania.

        3

        Odbierz Wynik

        Kliknij Oblicz. Ekran wyników wyświetla odpowiedź wraz z kolorowym paskiem stosunku, wykresem kołowym oraz objaśnieniem kroku po kroku.

        Przykłady Zadań z Rozwiązaniami Krok po Kroku

        Oto 3 przykładowe zadania z pełnym opisem kroków matematycznych w tym kalkulatorze:

        Wejście 1 Decode tire size 245/40R18
        1 Width: 245mm
        2 Aspect ratio: 40% → Sidewall = 245 × 0.40 = 98mm
        3 Rim: 18" = 457.2mm
        4 Diameter: (2 × 98) + 457.2 = 653.2mm = 25.72"
        Overall diameter: 653.2mm (25.72 inches)
        Wejście 2 Compare 225/45R17 vs 235/40R18
        1 225/45R17: Diameter = 634.3mm
        2 235/40R18: Diameter = (2×94) + 457.2 = 645.2mm
        3 Difference: 645.2 - 634.3 = 10.9mm
        4 Speedo error: (645.2/634.3-1)×100 = +1.72%
        235/40R18 is 10.9mm taller (+1.72% speedometer error)
        Wejście 3 Find aspect ratio for target diameter
        1 Want 26" (660.4mm) on 18" rim (457.2mm)
        2 Width: 245mm
        3 Needed sidewall: (660.4 - 457.2) / 2 = 101.6mm
        4 Aspect ratio: 101.6 / 245 × 100 = 41.5 ≈ 40 or 45
        Need ~41 aspect ratio — closest standard is 40 or 45

        Najczęściej Zadawane Pytania

        What does the aspect ratio number mean on a tire?

        The aspect ratio is the second number in a tire size (e.g., 45 in 225/45R17). It means the sidewall height is 45% of the tire's width. Lower numbers = shorter sidewall, sportier; higher numbers = taller sidewall, more comfortable.

        How does tire aspect ratio affect ride quality?

        Higher aspect ratios (55-70) provide more rubber between the road and rim, absorbing bumps better. Lower aspect ratios (35-45) are stiffer, providing sharper handling but transmitting more road imperfections to the cabin.

        What aspect ratio is best for performance?

        Sport/performance tires typically use 35-45 aspect ratio for maximum grip and responsiveness. Track cars may go as low as 25-30. The tradeoff is harsher ride and increased risk of rim damage from potholes.

        Can I change tire aspect ratio without changing wheel size?

        Yes, but the overall diameter should stay within 3% of original. Going from 225/55R17 to 225/50R17 lowers the car by about 11mm and makes the speedometer read slightly fast.

        How much speedometer error is acceptable?

        Most jurisdictions allow 3-5% speedometer variance. Keep tire overall diameter within 3% of the factory size. At 3% oversized, your speedometer shows 60 mph when you're actually going 61.8 mph.

        Dowiedz się Więcej o Stosunkach

        Co to jest stosunek liczb?

        Stosunek to porównanie dwóch lub więcej wartości pokazujące proporcjonalną zależność wielkości jednej z nich względem drugiej. Zapis typu A : B oznacza 'na każde A jednostek pierwszego elementu przypada B jednostek drugiego'. Przykładowo stosunek 3 : 4 oznacza, że na 3 części A przypadają 4 części B. Stosuje się go w gotowaniu, budownictwie, finansach i nauce.

        Jak rozwiązać proporcję?

        Proporcja to równość dwóch stosunków: A : B = C : D. Aby znaleźć brakującą wartość, używamy mnożenia na krzyż. Jeśli niewiadomą jest D: D = (B × C) / A. Reguła ta opiera się na tym, że iloczyn wyrazów skrajnych jest równy iloczynowi wyrazów środkowych (A × D = B × C). Nasz kalkulator wykonuje te obliczenia automatycznie.

        Jak uprościć stosunek?

        Aby uprościć stosunek, znajdź Największy Wspólny Dzielnik (NWD) obu liczb i podziel je przez niego. Na przykład dla stosunku 24 : 36 NWD wynosi 12. Dzieląc 24 przez 12 (mamy 2) i 36 przez 12 (mamy 3), otrzymujemy najprostszą postać — 2 : 3. Narzędzie znajduje NWD i skraca stosunek za Ciebie.

        Co to jest skalowanie stosunku?

        Skalowanie to pomnożenie obu wyrazów stosunku przez ten sam mnożnik w celu uzyskania równej proporcji w większym lub mniejszym rozmiarze. Na przykład stosunek 2 : 5 pomnożony przez 3 daje 6 : 15. Jest to przydatne przy dopasowywaniu porcji w przepisach kulinarnych lub skalowaniu rysunków technicznych i map.

        Czym różni się stosunek od ułamka?

        Stosunek A : B porównuje ze sobą dwie niezależne części (część do części), podczas gdy ułamek zwykły A/B zazwyczaj wyraża udział części w całości (część do całości). Mimo to matematycznie każdy stosunek można zapisać jako ułamek: 3 : 4 to 3/4 (lub 0.75). Różnica tkwi w kontekście użycia.