Sprocket Ratio Calculator
The Sprocket Ratio Calculator computes chain drive ratios from front (countershaft) and rear (wheel) sprocket tooth counts. Optimize your motorcycle, bicycle, or go-kart gearing for acceleration, top speed, or hill climbing performance.
🕐 Recent Calculations
What is a Sprocket Ratio?
A sprocket ratio is the relationship between the front (driving) and rear (driven) sprockets in a chain drive system. It equals Rear Teeth / Front Teeth. A 15-tooth front sprocket and 45-tooth rear gives a 3.0:1 ratio — the rear wheel turns once for every 3 engine/pedal rotations.
Changing sprocket ratios is the simplest way to alter a motorcycle's or bicycle's gearing characteristics. Adding teeth to the rear sprocket (or removing from front) increases the ratio for better acceleration. The opposite improves top speed but reduces low-end pull.
Wzory i Zastosowane Równania
Kalkulator opiera się na 5 podstawowych równaniach:
1 Sprocket Ratio ▼
45-tooth rear / 15-tooth front = 3.0:1 overall ratio.
2 Speed Change Percentage ▼
Going from 3.0:1 to 3.3:1: Change = ((3.3/3.0) - 1) × -100 = -10% top speed, +10% acceleration.
3 Final Drive Ratio (with primary) ▼
Multiply all ratios in the drivetrain for the overall reduction from engine to wheel.
Jak Korzystać z Kalkulatora
Aby skorzystać z tego kalkulatora stosunku, wykonaj 3 proste kroki:
Wprowadź Dane
Wpisz znane wartości w pola wejściowe. Jedno pole pozostaw puste — jest to niewiadoma, którą obliczy kalkulator.
Wybierz Tryb
Wybierz tryb pracy — Rozwiązywanie proporcji, Upraszczanie lub Skalowanie. Każdy tryb stosuje inne równania.
Odbierz Wynik
Kliknij Oblicz. Ekran wyników wyświetla odpowiedź wraz z kolorowym paskiem stosunku, wykresem kołowym oraz objaśnieniem kroku po kroku.
Przykłady Zadań z Rozwiązaniami Krok po Kroku
Oto 3 przykładowe zadania z pełnym opisem kroków matematycznych w tym kalkulatorze:
Wejście 1 Motorcycle: 16-front, 42-rear sprocket
Wejście 2 Change from 15/45 to 14/45 for more acceleration
Wejście 3 Bicycle: 32T chainring, 11-42T cassette range
Najczęściej Zadawane Pytania
How do sprocket ratios affect motorcycle performance? ▼
Higher ratios (bigger rear or smaller front) increase acceleration and hill-climbing ability but reduce top speed. Lower ratios do the opposite. One tooth on the front sprocket equals roughly 3 teeth on the rear in effect.
Should I change the front or rear sprocket? ▼
Front sprocket changes have a bigger effect per tooth (1 front ≈ 3 rear). Changing the front is cheaper and easier but may cause clearance issues. Rear changes are gentler and offer finer adjustment.
How does sprocket ratio affect chain wear? ▼
Extreme ratios (very small front or very large rear) increase chain wrap angle and side loading, accelerating wear. Keep front sprockets at 12T or larger. Always replace the chain with new sprockets.
What is the stock sprocket ratio for most motorcycles? ▼
Varies by model. Sport bikes typically use 2.5-3.0:1, cruisers 2.2-2.8:1, and dirt bikes 3.5-4.5:1. Check your owner's manual for stock tooth counts.
Do I need a new chain length when changing sprockets? ▼
Changing by 1-2 teeth usually works with the existing chain. Larger changes (3+ teeth difference from stock) may require adding or removing chain links. Always verify chain tension and adjustment range.